☎ (044) 387-18-55 ✉
7MH71001EB61, MILLFLO, 4" 2LB, 316SS SIZE AND FABRICATION: 4", 316 STAINLESS STEEL LOAD CELL: 2 IB STAINLESS STEEL SENSING PLATE FABRICATION: FOR SIZES 4" / DN 100 ONLY
7ML56031FC111XA0; Y01=2000MM; CRYOGENIC ELECTRONIC TRANSMITTER MSP2002-1 (330 PF) SINGLE PIECE FLANGE,316L SS, TYPE B1 RAISED FACED DN80 PN16 PROBE INSULATION/MATERIAL OF PROCESS CONNECTION PFA INSULATION/316L SS APPROVALS GENERAL PURPOSE PROBE/ELECTRODE DIAMETER 16 MM (0.63") RIGID ROD, MAXIMUM LENGTH 1000 MM(39.4") THERMAL ISOLATOR/REMOTE VERSION RIGID THERMAL ISOLATOR FOR PROCESS TEMPERATURE OVER +85 C (+185 F) Y01=2000MM Y02=50MM
7ML5735-1AB11-0AA0;Y01=195 MM INPUT VOLTAGE: DPDT RELAY - 19 TO 253 V AC, 19 TO 55 V DC PROCESS TEMPERATURE UP TO 150 C (+302 F) PROCESS CONNECTION:1 1/4" NPT ((TAPER), ANSI/ASME B1.20.1) EXTENSION LENGTH STAINLESS STEEL 316TI (1.4571) APPROVALS CSA/FM GENERAL PURPOSE, CE, C-TICK TOTAL INSERTION LENGTH: Y01 = 195MM
7ML5650-3BA10-0HB0; Y01=350; Y02=250MM PROCESS CONNECTION G 1" (BSPP) LENGTH (THREADED LENGTHS INCLUDE PROCESS THREAD.) STANDARD VERSION, ROD 350 MM (13.78") THERMAL ISOLATOR WITH TI WETTED SEALS FKM PROBE MATERIAL: 316L SS WITH PFA LINING AND PEEK ISOLATORS APPROVALS: CSA/FM CLASS I, DIV. 1, GR. A, B, C, D, CSA/FM CLASS II, DIV. 1, GR. E, F, G, CSA/FM CLASS I ENCLOSURE: ALUMINUM EPOXY COATE 2 X M20 X 1.5 CABLE INLET, IP6 ACTIVE SHIELD LENGTH EXTENDED SHIELD - (250 MM THREADED, 230 MM FLANGED)
7ML13016AB312XX0,Y15,3000MM, DN100PN40 E MODEL: COAXIAL, INTERFACE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: 300CM O-RINGS: EPDM (ETHYLENE PROPYLENE RUBBER) PROCESS CONNECTION (SIZE/TYPE) DN 100 PN 25/40 EN 1092-1 TYPE E FACE ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT DESCRIPTION, MAX. 610 CM (240.2") Y01 = 300CM Y15 TAG LIRA442
7ML54310XX200DC0,Y15,DN100 PN40 1092-1 E PROCESS CONNECTION AND ANTENNA MATERIAL: 316L (1.4435 OR 1.4404) STAINLESS STEEL, PTFE EMITTER, FKM SEAL PROCESS CONNECTION TYPES: DN 100PN40 EN1092-1 TYPE E FACE SPIGOT FACED COMMUNICATION 4-20MA HART, START-UP AT <3.6MA ENCLOSURE (WITH CABLE INLETS): ALUMINUM, EPOXY PAINT, 2 X 1/2" NPT ANTENNA: 4" HORN (FITS 4" ASME OR DN 100 NOZZLES) APPROVALS INTRINSICALLY SAFE: IECEX/ATEX II 1 GD EX IA IIC T4, (IS BARRIER REQUIRED)
7ML57472DXXX1BA2,DN150,PN25, TYPEA. ELECTRONICS: CONTACTLESS ELECTRONIC SWITCH 20...250 V AC/DC APPROVAL ATEX II 1/2G, 2G EEX D IIC T6 + WHG PROCESS CONNECTION / MATERIAL FLANGE DN150 PN25 TYPE A, EN 1092-1 / 316L ADAPTER/PROCESS TEMPERATURE WITHOUT ADAPTER / -50...150C HOUSING/CABLE ENTRY ALUMINIUM IP66/IP67 / 1/2" NPT RIGID EXTENSION 316L Y01: 1200
MILLFLO, 7MH7101-2AB12, 150MM MS, 2 LB SIZE AND FABRICATION: 150 MM, STANDARD ORANGE PAINT LOAD CELL: 2 LB, STAINLESS STEEL SENSING PLATE FABRICATION: 304 STAINLESS STEEL
ILE37, SM DIAPHRAGM RING AND HARDWARE,SPARES. 1 MACHINED ALUMINUM RING (PBD-54000141) 4 SHCS M6 X 1, 12 MM LONG, 304 STAINLESS STEEL
7ML57313AX131BA0.DN50,PN16 POWER SUPPLY: 18 TO 50 V DC PNP PROCESS TEMPERATURE: WITHOUT TEMPERATURE ISOLATOR PROCESS CONNECTION: FLANGED, DN100 PN 16, EN1092-1 (1.4541/321) EXTENSION LENGTH:Y01=520MM MATERIAL PROCESS CONNECTION/ EXTENSION STAINLESS STEEL 304 (1.4301) APPROVALS: ATEX II 1/2 D, C-TICK
7ML56301AC200CB0, REMOTE MOUNT 2M PROCESS CONNECTION R 3/4" ((BSPT), EN 10226/PT (JIS-T), JIS B 0203) PROBE LENGTH EXTENDED ROD, 350 MM (13.78") REMOTE MOUNT ELECTRONICS AND MOUNTING BRACKET REMOTE MOUNT ELECTRONICS WITH 2M(79")CABLE WETTED SEALS FKM PROBE MATERIAL 316L STAINLESS STEEL WITH PPS PROBE BODY APPROVALS DUST IGNITION PROOF, CE, C-TICK,ATEX II 1/2 D T100 ENCLOSURE AND LID ALUMINUM EPOXY COATED 2 X M20 X 1.5 CABLE INLET, IP65
7ML56311DC000JB0 WITH EXTRA PROCESS CONNECTION. PROCESS CONNECTION: R 1 1/2" ((BSPT), EN 10226/PT (JIS-T), JIS B 0203) PROBE LENGTH: EXTENDED CABLE, 5000 MM THERMAL ISOLATOR WITHOUT THERMAL ISOLATOR PROBE MATERIAL FKM AND PTFE APPROVALS FEP JACKETED CABLE WITH PPS PROBE BODY ENCLOSURE AND LID GENERAL PURPOSE (CSA, FM) ALUMINUM EPOXY COATED 2 X M20 X 1.5 CABLE INLET, IP65
7ML11062XA200A,80M PROCESS CONNECTION R 1" ((BSPT), EN 10226) CABLE LENGTH 80 M FACING STANDARD (CSM RUBBER) APPROVALS FM CLASS I, ATEX II 2G, CSA CLASS I DIV. 2, SAA CLASS I MOUNTING FLANGE (FLUSH MOUNT) NONE